LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Tracker 4D Utility, 2.0 C, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Basic Ignition System Checks >> Electronic Ignition System Diagnosis >> Test Description
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Description

The numbers below refer to the step numbers in the diagnostic procedure.

  1. 2

    Cranking engine for 10 seconds allows Camshaft Position Sensor (CMP) diagnostic to run. If there is a fault in CMP sensor circuit, ignition system can malfunction. Repair cause of a DTC P0340 first.

  2. 5

    This step checks for a condition that can cause a loss of spark, even though results in step 3) indicated that there was good spark.

  3. 13

    This step checks whether engine will start and run. A repair that has been performed leading to this step may only have been a contributing cause of a no-start condition. Returning to NO-START - ENGINE CRANKS OKAY (2.0L)  or NO-START - ENGINE CRANKS OKAY (2.5L)  under NO-START DIAGNOSIS, will locate additional causes of a no-start condition.

scientia non olet · About LEMON Manuals