LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> TrailBlazer RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame & Underbody >> Repair Instructions >> Engine Protection Shield Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Removing/Installing Engine Shield
    GM687450Courtesy of GENERAL MOTORS CORP.
  1. Install the engine shield.
    2. NOTE: Refer to Fastener Notice in CAUTIONS & NOTICES .
  2. Install the engine shield mounting bolts.

    Tighten:  Tighten the engine shield mounting bolts to 25 N.m (18 lb ft).

  3. Lower the vehicle.
scientia non olet · About LEMON Manuals