LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 845 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitoring Sensor Programming >> Programming TPM Sensors
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming TPM Sensors

WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition to ON.
  2. Press the key fob lock and unlock buttons simultaneously for several seconds. The horn will chirp when the TPM programming mode is activated.

    Important:  If the TPM programming mode cannot be entered, check if the DIM is configured with the correct RPO codes.

  3. Starting with the left front tire.
  4. Install the J 41760  over the left front valve stem.
  5. The horn will sound, indicating the left front TPM sensor is programmed.

    Important:  If the horn does not sound after 15 seconds, remove then reinstall the TPM sensor programming tool.

  6. When the horn sounds, proceed to program the next TPM sensor in the following order:
    • Right front tire
    • Right rear tire
    • Left rear tire
  7. After the left rear sensor is programmed, the horn will sound twice to indicate programming is complete.
scientia non olet · About LEMON Manuals