LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Install the switch assembly to the trim panel by snapping the switch into the plastic retaining clips.
    Fig 1: Installing Switch Assembly To Trim Panel By Snapping Switch Into Plastic Retaining Clips
    G01478046Courtesy of GENERAL MOTORS CORP.
  2. Install the electrical connector to the switch.
    Fig 2: Installing Electrical Connector To Switch
    G01478047Courtesy of GENERAL MOTORS CORP.
  3. Install the trim panel to the seat with 3 screws.
  4. Install the seat to the vehicle. Refer to SEAT REPLACEMENT - Bucket  or SEAT REPLACEMENT - Bench .
    Fig 3: Installing Trim Panel To Seat With Screws
    G01478048Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals