Theft Deterrent Password Learn Procedure: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
If replacing the Passlock® module with a GM Service Parts Operations (SPO) replacement part, the module will learn Passlock® sensor data code immediately. The existing PCM however, must learn the new fuel continue password when the Passlock® module is replaced.
If replacing a PCM with a GM Service Parts Operations (SPO) replacement part, after programming, these modules will learn the incoming fuel continue password immediately upon receipt of a password message. Once a password message is received, and a password is learned, a learn procedure must be performed to change this password again. A PCM which has been previously installed in another vehicle will have learned the other vehicle's fuel continue password and will require a learn procedure after programming to learn the current vehicle's password.
Use this procedure after replacing:
- Passlock® Sensor
- Passlock® Module
- PCM