LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> S10 Pickup 2D Pickup, 2.2 H, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Engine Component Tests - 2.2L >> Fuel Systems >> Fuel System Cleaning >> Removal Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedures

  1. Disconnect negative battery cable.
  2. Relieve fuel system pressure. Refer to FUEL SYSTEM PRESSURE RELEASE under FUEL SYSTEMS in BASIC DIAGNOSTIC PROCEDURES - 2.2L SONOMA & S10 PICKUP article.
  3. Remove pickup box.
  4. Drain fuel tank.
  5. Remove fuel tank.
  6. Remove fuel sender assembly. Whenever the fuel tank is cleaned, fuel pump strainer must be inspected. If strainer is contaminated, replace strainer and fuel filter. Inspect fuel pump inlet for dirt and debris. If found, replace fuel sender and fuel filter.
  7. Flush fuel tank with hot water.
  8. Pour water out of fuel sender assembly opening.
  9. Rock tank to ensure that removal of water from tank is complete.
scientia non olet · About LEMON Manuals