Changing the Interior Lighting Mode
WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following procedure to change the interior lighting mode:
- Turn OFF the dimmer switch.
- Turn the ignition switch to the LOCK position.
- Remove the BCM PRGRM fuse.
- Turn the ignition switch to the ACC position.
- The BCM sounds the chime a number of times equivalent to the BCM type installed on the vehicle, 1, 2, 3 or 4 chimes.
- Now the BCM has entered the feature customization mode.
- To advance the interior lighting mode, cycle the dimmer switch from OFF to DOME and back to OFF.
The BCM sounds the chime a number of times equivalent to the lighting mode currently set. A transition past mode 4 repeats the sequence starting with mode 1.
To exit and save the current customization mode:
- Turn the ignition switch to the LOCK position.
- Reinstall the BCM PRGRM fuse.