LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Blazer 2D Utility, 4WD, Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

    Fig 1: Locating Ignition Control Module Components
    GM690078Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (3).
  2. Remove 2 screws (4) holding the ignition control module (2) and the heat sink (1) to the bracket.
  3. Remove the ignition control module and heat sink.
scientia non olet · About LEMON Manuals