LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View of Cruise Control Module & Negative Battery Cable
    GM740522Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Disconnect the electrical connector from the cruise control module.
    3. Fig 2: View Of Cruise Control Cable At Throttle Body Cam Lever
    GM792955Courtesy of GENERAL MOTORS CORP.
  3. Open the throttle body cam slightly.
  4. Disconnect the cruise control cable from the throttle body cam lever.
  5. Remove the cruise control cable from the throttle body bracket.
  6. Remove the cruise control cable from the retainer clip on the engine.
    7. Fig 3: View of Cruise Control Module & Cruise Control Cable
    GM740527Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the cruise control cable from the cruise control module by turning the cable 1/4 turn counterclockwise.
  8. Disconnect the cruise control cable slug from the ribbon buckle.
  9. Remove the cruise control cable from the engine compartment.
    10. Fig 4: View of Cruise Control Mounting Bracket & Retainer Strap
    GM740525Courtesy of GENERAL MOTORS CORP.
  10. Release the retainer strap from the cruise control module mounting bracket.
    11. Fig 5: Removing Cruise Control Module from Mounting Bracket
    GM740528Courtesy of GENERAL MOTORS CORP.
  11. Remove the cruise control module from the mounting bracket.
    12. Fig 6: Identifying Cruise Control Mounting Bracket Screws
    GM737625Courtesy of GENERAL MOTORS CORP.
  12. Reposition the surge tank to access the bolts to the cruise control mounting bracket. Refer to Surge Tank Replacement in Engine Cooling.
  13. Disconnect the wiring harness from the connector and reposition the wiring harness.
  14. Remove the bolts from the cruise control mounting bracket.
  15. Remove the cruise control mounting bracket from the engine compartment.
scientia non olet · About LEMON Manuals