Scan Tool Data Definitions
- Ignition Voltage
-
The scan tool displays 0-17 volts. The amount of ignition voltage at the EBCM.
- Left Front Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left front wheel.
- Left Rear Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left rear wheel.
- Right Front Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right front wheel.
- Right Rear Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right rear wheel.
- Switched System Battery Voltage
-
The scan tool 0-17 volts. The level of internal EBCM voltage available to the VES actuator when the ABS relay is energized.
- VES Commanded Current
-
The scan tool displays -2.00 to 3.00 amps. The amount of current the EBCM is commanding to the VES actuator.
- VES Failed
-
The scan tool displays Yes or No. Yes indicates a malfunction has been detected within the VES system. No indicates the VES system is operating to specification.
- VES Feedback Current
-
The scan tool displays 2.00 to 3.00 amps. The absolute, or positive value of current returning from the VES actuator to the EBCM. Thus the - symbol is not displayed.
- VES Indicator/Message
-
The scan tool indicates ON or Off. The state of the VES malfunction indicator or message, if equipped.