LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Position the lumbar control switch to the outer seat cushion trim panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws (1) to the lumbar control switch.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: Installing Lumbar Control Switch Screws
    GM787091Courtesy of GENERAL MOTORS CORP.
  3. Install the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals