Removal Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The new wiper drive system module does not include the wiper motor nor the motor support bracket. You must install the old components to the new wiper system module.
- Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
- Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
- Remove the bolts (1) attaching the wiper module to the plenum.
- Carefully lift the wiper module out of the plenum.
- Disconnect the electrical connector from the wiper motor.
- Remove the wiper module assembly (2) from the vehicle.
- Remove the wiper motor (1). Refer to Windshield Wiper Motor Replacement .