Installation Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery current sensor (1) by passing the ground ends of the negative battery cable through the sensor.
- Measure from the same end as earlier, and slide the current sensor to that measurement on the negative battery cable.
- Install the battery negative cable. Refer to Battery Negative Cable Replacement (LY7) , Battery Negative Cable Replacement (LE5/LE9) .
IMPORTANT:
Ensure the battery current sensor is installed in the correct direction and location on the negative battery cable.