LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Programming And Setup - All Systems) >> Repair Instructions >> Body Control Module Programming and Setup >> Brazil Units (CV2) Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brazil Units (CV2) Calibration

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

This setup is only applicable for Brazil vehicles.

In order to setup the BCM for Brazilian fuel economy units using a scan tool, select Brazil Units (CV2) and then Fuel Economy Units km/L.

NOTE:

After programming, perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
scientia non olet · About LEMON Manuals