Massaging Lumbar Control Module Replacement

WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Memory Seat Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the front seat. Refer to Seat Replacement . Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement .
1	Frame, Seat Cushion Refer to Front Seat Cushion Frame Replacement .
2	Screw, Front Seat Massaging Lumbar Module (Qty: 4) Tighten: 3 N.m (25 lb in)
3	Module, Front Seat Massaging Lumbar Module Tip: Disconnect the electrical connector and remove from the bracket. Refer to Control Module References for programming and setup information.