LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 847 (Adjustable Pedal System) >> Repair Instructions >> Adjustable Pedal Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side .
    2. Fig 1: Identifying Adjustable Pedal Module In Side Of I/P Support Beam
    GM1469984Courtesy of GENERAL MOTORS CORP.
  2. Carefully cut and remove the tie strap securing the adjustable pedal module to the I/P support beam.
  3. Remove the adjustable pedal module (1) from the side of the I/P support beam.
  4. Disconnect the electrical connector from the adjustable pedal module.
scientia non olet · About LEMON Manuals