Shift Lever Does Not Move with Brake Pedal Depressed
Shift Lever Does Not Move with Brake Pedal Depressed
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Automatic Transmission Shift Lock Control Schematics Connector End View Reference: Automatic Transmission Shift Lock Control Connector End Views or Body Control System Connector End Views DEFINITION: Transmission shift lever will not moved out of the PARK position with the Ignition on and the brake pedal pressed. |
|||
| 1 | Did you perform the A Diagnostic System Check - Automatic Transmission Shift Lock Control? | Go to Step 2 | Go to Diagnostic System Check - Automatic Transmission Shift Lock Control |
| 2 |
|
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 |
|
Go to Step 5 | Go to Step 4 |
| 4 |
|
Go to Step 7 | Go to Step 6 |
| 5 |
|
Go to Step 10 | Go to Step 8 |
| 6 | Inspect for poor connections at the harness connector of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 10 | Go to Step 9 |
| 7 | Repair the short to battery positive voltage in the automatic transmission shift lock control solenoid supply voltage circuit. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you complete the repair? |
Go to Step 10 | - |
| 8 | Replace the automatic transmission shift lock control switch. Refer to Stop Lamp Switch Replacement
in Lighting Systems. Did you complete the replacement? |
Go to Step 10 | - |
| 9 | Replace the automatic transmission shift lock control solenoid. Refer to Automatic Transmission Shift Lock Actuator Replacement (Floor Shift) or Automatic Transmission Shift Lock Actuator Replacement (Column Shift) . Did you complete the replacement? |
Go to Step 10 | - |
| 10 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |