LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Keyless Entry System >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the remote control door lock receiver (2) to the mounting bracket (3). Secure the receiver with 2 screws (1).
    2. Fig 1: View Of Remote Control Lock Receiver Bracket
    GM493925Courtesy of GENERAL MOTORS CORP.
  2. Connect the receiver electrical connector (3).
  3. Install the 2 retainers (2,4) which secure the remote control door lock receiver electrical connector (3).
    4. Fig 2: View Of Remote Control Door Lock Receiver Electrical Connector
    GM493927Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Reposition the receiver bracket (2) back to its original position. Secure the receiver bracket with the retaining nut (1).

    Tighten:  Tighten the remote control door lock receiver bracket nut to 10 N.m (89 lb in).

    5. Fig 3: View Of Remote Control Door Lock Receiver
    GM493947Courtesy of GENERAL MOTORS CORP.
  5. Reprogram the remote control door lock receiver. Refer to Transmitter Programming (Second Method) .
scientia non olet · About LEMON Manuals