LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System - 2.5L (LE8) (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the fuel tank pressure sensor (2) with a new o-ring seal (3) to the fuel tank.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Secure the fuel tank pressure sensor with the two fasteners (1).

    Tighten:  Tighten the fasteners to 3.5 N.m (30 lb in).

  3. Connect the electrical connector to the fuel tank pressure sensor.
  4. Install the fuel tank. Refer to Fuel Tank Replacement .
    5. Fig 1: View Of Fuel Vapor Temperature Sensor, New O-Ring & Fasteners
    GM683995Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals