LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Lighting Systems) >> Repair Instructions >> Daytime Running Lights (DRL) Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Montana, 2003 Oldsmobile Silhouette, and 2003 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the daytime running lamp module in the bracket.
    Fig 1: Disconnecting Connector
    G01534050Courtesy of GENERAL MOTORS CORP.
  2. Slide the daytime running lamp module into the bracket in order to secure the module.
  3. Connect the electrical connectors.
  4. Install the instrument panel insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT in Instrument Panel, Gages and Console.
  5. Connect the battery negative cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE in Battery.
    Fig 2: Disconnecting Connector
    G01534051Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals