Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the EGR valve outlet pipe (1).
- Install the EGR outlet pipe bolt (3) to the intake manifold.
Tighten: Tighten the bolt to 30 N.m (22 lb ft).
- Install the EGR outlet pipe nut (2) to the EGR valve inlet adapter pipe.
Tighten: Tighten the nut to 30 N.m (22 lb ft).
- Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
NOTE:
Refer to Fastener Notice in Cautions and Notices.