LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Power Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the module into the mounting bracket and push until the module is fully seated.
    Fig 1: Installing Module Toward Rear Of Seat
    G01814309Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors.
    Fig 2: Installing Memory Seat Control Module
    G01814310Courtesy of GENERAL MOTORS CORP.
  3. Install the drivers seat.
  4. Enable the SIR system. Refer to ENABLING THE SIR SYSTEM .