October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Clean the gasket mating surface on the fuel tank.
- Position the new gasket in place.
- Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
- Install the fuel pump assembly clip.
- Connect the fuel pump assembly connector.
- Install the fuel pump line.
- Install the fuel pump access cover.
- Install the EF10 fuse.
- Connect the negative battery cable.
- Perform an operational check of the fuel pump.
- Install the rear seat. Refer to Seat Cushion Replacement - Rear
in Seats.