LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Part Time, Automatic >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Electronic Compass Module Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: View Of Electronic Compass Sensor
    GM393033Courtesy of GENERAL MOTORS CORP.
  1. Install the compass sensor to the overhead console.
  2. Install the overhead console. Refer to Driver Information Center Replacement (Without Sunroof)  or Driver Information Center Replacement (With Sunroof) .
  3. Calibrate the compass. Refer to Electronic Compass Calibration .