LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: View Of Accelerator Cable At Accelerator Pedal
    GM424544Courtesy of GENERAL MOTORS CORP.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
  2. Lift upward on the accelerator pedal in order to relieve tension on the cable.
  3. Remove the retainer from the pedal lever hole by compressing the tabs on the retainer.
    4. Fig 2: Locating Accelerator Pedal Assembly Components
    GM350251Courtesy of GENERAL MOTORS CORP.
  4. Remove cable from the slot in the pedal lever (1).
  5. Remove the accelerator pedal mounting nuts (2).
  6. Remove the accelerator pedal assembly.
scientia non olet · About LEMON Manuals