HVAC Control Lamp Replacement

HVAC CONTROL LAMP REPLACEMENT

REMOVAL PROCEDURE
1. Remove the instrument panel, (I/P) accessory trim plate.
2. Remove the screws from the HVAC control.




3. Pull the HVAC control away from the I/P.
4. Remove the bulbs/sockets (1) from the HVAC control.
5. Remove the bulbs from the sockets.

INSTALLATION PROCEDURE




1. Install the bulbs to the sockets (1).
2. Install the bulbs/sockets (1) to the HVAC control.
3. Install the HVAC control to the I/P.
4. Install the screws to the HVAC control.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

5. Install the I/P accessory trim plate.