Removal Procedure
- Remove the engine cover. Refer to Engine Cover Replacement
Interior Trim.
Courtesy of GENERAL MOTORS CORP.
- Remove the upper intake manifold assembly. Refer to Intake Manifold Replacement - Upper
in Engine Mechanical-4.3L.
- Remove the fuel pressure regulator retainer clip (13).
- Pull and twist the fuel pressure regulator (14) in order to remove the fuel pressure regulator from the fuel pressure regulator housing using a shop towel to catch any spilled fuel.
- Remove the regulator seal lower O-ring (18).
- Remove the regulator assembly filter (17).
- Remove the regulator seal upper O-ring (16).
- Remove the regulator seal backup ring (15).
- Cover the fuel pressure regulator housing to prevent contamination from entering the fuel system.
- Discard the O-rings.