October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal Procedure
- Turn off the ignition switch.
- Open the center console door.
- Pull up on the rear of the switch assembly in order to release the mounting clips; if the switch does not release from the trim plate, perform the following steps:
- Carefully insert a screwdriver into the access hole located on the rear of the switch assembly.
- Gently pull up on the switch.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the harness connector (1).
- Remove the switch assembly (2).