LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Equinox LS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Ignition Coil/Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Ignition Coil/Control Module
    GM1422425Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil/control module to the ignition control module bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 4 bolts securing the ignition coil/control module to the ignition control module bracket.

    Tighten:  Tighten the bolts to 4.5 N.m (40 lb in).

  3. Connect the ignition coil/control module electrical connectors.
  4. Connect the spark plug wires.
  5. Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.4L.
scientia non olet · About LEMON Manuals