Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the spark plug wires (1) to the ignition coil/control module.
- Install the spark plug wires (1) to the right side spark plugs.
- Install the spark plug wires to the retaining clips (2).
Courtesy of GENERAL MOTORS CORP.
- Install the spark plug wires (1) to the left side spark plugs.
- Install the spark plug wires to the retaining clips (2).
- Install the injector sight shield. Refer to Fuel Injector Sight Shield Replacement
in Engine Mechanical - 3.4L.