LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Equinox LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of MAP Sensor, Bracket & Retaining Bolt
    GM1087786Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor (1) to the intake manifold.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the MAP sensor retaining bracket (2) and bolt (3).

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Connect the MAP sensor electrical connector.
scientia non olet · About LEMON Manuals