LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Equinox LT, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Ignition Coil/Control Module Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.4L.
    2. Fig 1: View Of Ignition Coil/Control Module
    GM1422425Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the spark plug wires. Note the position from which the wires are removed.
  3. Disconnect the ignition coil/control module electrical connectors.
  4. Remove the 4 bolts securing the ignition coil/control module to the ignition control module bracket.
  5. Remove the ignition coil/control module.
scientia non olet · About LEMON Manuals