LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Engine Controls/Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Mass Airflow Sensor with Intake Air Temperature Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of MAF/IAT Sensor Wiring Harness Connector
    GM1838957Courtesy of GENERAL MOTORS COMPANY
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector from the mass airflow (MAF)/intake air temperature (IAT) sensor.
    3. Fig 2: View Of MAF/IAT Sensor
    GM1837985Courtesy of GENERAL MOTORS COMPANY
  3. Remove the MAF/IAT sensor screws.
  4. Remove the MAF/IAT sensor.
  5. Remove and discard the MAF/IAT sensor seal.
scientia non olet · About LEMON Manuals