LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Front Suspension System) >> Repair Instructions >> Lower Control Arm Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Lower Control Arms
    GM891615Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the lower control into the frame using new bolts.

    Tighten:  Tighten the bolts to 90 N.m (66 lb ft) plus an additional 75 to 90 degrees.

    2. Fig 2: Disconnecting Lower Control Arms
    GM891570Courtesy of GENERAL MOTORS CORP.
  2. Install a new ball stud to steering knuckle pinch bolt and nut.

    Tighten:  Tighten the bolt and nut to 100 N.m (74 lb ft).

  3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
  5. Inspect the vehicle for alignment. Refer to Measuring Wheel Alignment in Wheel Alignment.
scientia non olet · About LEMON Manuals