Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Sunroof Module Assembly

Courtesy of GENERAL MOTORS CORP.

With an assistant, position the sunroof module into the studs located on the roof ring.
Install the 2 center bolts which secure the sunroof module to the roof and tighten the bolts by hand.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the remaining sunroof module bolts.
Tighten: Tighten all of the bolts to 10 N.m (89 lb in).

Fig 2: View Of Sunroof Front Drain Hose

Courtesy of GENERAL MOTORS CORP.

Connect the front and rear drain hoses to the drain spouts on the sunroof module.

Fig 3: View Of Sunroof Motor/Actuator Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors to the sunroof motor/actuator.
Secure the harness to the sunroof module.
Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
Cycle the sunroof to verify proper operation before securing the headliner.
Install the headliner. Refer to Headliner Replacement (Wagon) or Headliner Replacement (Sedan) in Interior Trim.