LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 213 (Entertainment System) >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical/audio and coaxial cable connectors to the radio control.
  2. Install the radio control into position in the I/P center support bracket.

    Align the radio control locator tab into the center support bracket locator hole.

    3. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
    Fig 1: Installing Radio Control
    GM1237162Courtesy of GENERAL MOTORS CORP.
  3. Install the radio control retaining screws.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  4. Install the HVAC control module. Refer to HVAC CONTROL MODULE REPLACEMENT .
  5. Install the I/P accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY in Instrument Panel, Gages, and Console.
  6. Install the RDO/CD MiniFuse® #5 to the I/P electrical center.
  7. Install the cover to the I/P electrical center.
scientia non olet · About LEMON Manuals