LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Uplander Base, Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Cellular Communication Systems) >> Repair Instructions >> Antenna Assembly Replacement - Cellular and Navigation >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac Aztek and 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Retaining Nut Of Antenna Assembly
    GM838978Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Attach the antenna base to the roof and fasten the antenna nut.

    Tighten:  Tighten the nut to 2 N.m (18 lb in).

    2. Fig 2: Identifying Retaining Nut Of Antenna Assembly
    GM838978Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the antenna.
  3. Push the headliner back into place. Refer to Trim Panel Replacement - Side Front Door (Aztek) or Trim Panel Replacement - Side Front Door (Rendezvous) in Interior Trim.
  4. Attach the sunshade to the headliner. Refer to Sunshade Replacement in Interior Trim.
  5. Attach the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
scientia non olet · About LEMON Manuals