LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Mirror System) >> Repair Instructions >> Side Window Filler Panel Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Filler Panel To Windshield Pillar
    GM423947Courtesy of GENERAL MOTORS CORP.
  1. Remove the windshield weatherstrip, the side retainer, and the windshield side reveal molding. Refer to Windshield Side Reveal Molding Replacement (Coupe and Convertible) or Windshield Side Reveal Molding Replacement (Hardtop) .
  2. Remove the side window filler panel.
  3. Remove the screws attaching the filler panel.
  4. Separate the filler panel from the sealant attaching the panel to the windshield pillar.
  5. Remove the old sealant from the windshield pillar.
scientia non olet · About LEMON Manuals