LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Data Communication System) >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BCM Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BCM Setup

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • After the procedure is completed, the personalization settings of the BCM are set to a default setting. Inform the customer that the personalization must be set again.
  • Always perform this procedure after BCM or SDM replacement.
  • A new BCM may set DTC B1001 00 before performing this procedure. This is a normal condition and DTCs will clear after the procedure is performed.

Follow the instructions on the scan tool for BCM Setup to perform this procedure.

During this procedure, besides RPO configuration, the BCM relearns the restraints ID.

scientia non olet · About LEMON Manuals