LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the BCM.
    2. Fig 2: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  2. Align the tabs on the BCM with the slots in the mounting bracket. Push the BCM up until the module clicks into place.
  3. Install the right side I/P insulator.
  4. Connect the negative battery cable. Refer to ENGINE ELECTRICAL .
  5. Setup the BCM customized options.
scientia non olet · About LEMON Manuals