LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to ENGINE ELECTRICAL .
  2. Remove the right side instrument panel (I/P) insulator.
    3. Fig 1: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  3. Push the release tab on the bottom of the bracket to release the body control module (BCM).
  4. Slide the BCM from the bracket.
    5. Fig 2: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connectors.
scientia non olet · About LEMON Manuals