Sensing and Diagnostic Module (SDM) Replacement
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
If the sensing and diagnostic module (SDM) is replaced, the following procedures must be performed:
- BCM Reprogramming-Refer to Body Control Module (BCM) Programming/RPO Configuration in Computer/Integrating Systems for replacement, setup, and programming.
- Theft Learn-Refer to Programming Theft Deterrent System Components in Theft Deterrent.