Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel (I/P) upper trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper . Program the remote control door lock receiver after replacement. Refer to Control Module References .
1	Transmitter Assembly, Remote Control Door Lock Tip: Disconnect the electrical connector. Push the 2 tabs towards the module assembly in order to release the module.

Callout

Component Name

Preliminary Procedure

Remove the instrument panel (I/P) upper trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper .
Program the remote control door lock receiver after replacement. Refer to Control Module References .

Transmitter Assembly, Remote Control Door Lock
Tip:

Disconnect the electrical connector.
Push the 2 tabs towards the module assembly in order to release the module.