Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the control module/receiver on its mounting bracket.
- Connect the control module/receiver electrical connector.
- Install the floor console. Refer to Front Floor Console Replacement (Notchback) or Front Floor Console Replacement (Hatchback) .
- Connect the negative battery cable.
- Complete remote keyless transmitter programmming. Refer to Transmitter Programming