Scan Tool Data Definitions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 GMC Savana Special, 2006 GMC Savana Camper Special, 2006 GMC Savana, 2006 Chevrolet RV Cutaway, and 2006 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Accessory Switch: Input from ignition switch Accessory circuit. Used to determine power mode. Hot in ACC and ON.
Battery Voltage: The scan tool displays 0.0-16.0 volts. The battery voltage input represents the system voltage measured at the BCM ignition feed input.
Cargo Door Ajar Switch: Input from the cargo door showing the state of it.
Driver/Passenger Door Ajar Sw.: Input from the respecting door indicating door status.
GM Part Number: The module's part number.
Ignition Unlock: Input to the control module from the ignition switch indicating the Ignition 0 position. Switch closed (HOT) in ignition switch positions UNLOCK, ACC, ON, and START.
Run/Crank: Input to the control module from the ignition switch indicating the Ignition 1 position. Switch closed (HOT) in ignition switch positions ON and START.
Key in Ignition: Input from ignition switch indicating that the ignition key is inserted into the ignition switch. HOT with key in ignition switch.
Julian Date of Build: The day of the year when module was built.
RAP Relay: Output indicating the state of the RAP relay. It is On for all power modes except Off Awake.
Year Module Built: The year when module was built.