LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2007 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 903 (Engine Controls And Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the ECT sensor and tighten to 22 N.m (16 lb ft).
    2. Fig 2: Identifying ECT & HO2S Wiring Harness Connectors
    GM1838989Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (1) to the ECT sensor.
scientia non olet · About LEMON Manuals