Circuit/System Verification
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Trunk Release Switch parameter while pressing and releasing the rear compartment lid release switch. The parameter should change between Active and Inactive.
- If the parameter does not change, refer to Trunk Release Switch Malfunction.
- Command the trunk release with a scan tool, the rear compartment lid latch should release the trunk lid.
- If the rear compartment lid latch does not release, refer to Rear Compartment Lid Latch Malfunction.