Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Bose Amplifier Scan Tool Output Control
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Center I/P Mid Range | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Chime Test | N/A | Commanding the chime ON will sound the requested chime. |
| LF Tweeter - Door | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| LR Full Range | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Rear Subwoofer | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| RF Tweeter - Door | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| RR Full Range | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
Delco Amplifier Scan Tool Output Control
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Left Front Full Range | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Left Front Tweeter | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Left Rear Full Range | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Rear Subwoofer Coil 1 | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Rear Subwoofer Coil 2 | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Right Front Full Range | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Right Front Tweeter | Front Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Right Rear Full Range | Rear Speakers | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
Radio Scan Tool Output Control
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Band Update | Optional Module | This function is used to disable the XM band from being displayed on the navigation radio. |
| Dimming Delay | Set Options | This function is used to set the delay of radio dimming, in relation to other displays, when the park lamps are turned on or off |
| Export ID | Set Options | This function is used to identify the vehicle as an export vehicle. |
| Language | Set Options | This function is used to set the language shown on the vehicle displays. |
| Long Wave | Set Options | This function is used to setup the radio to receive long wave channels. |
| Optional Modules | Set Options | This function is used to setup the radio to use OnStar. |
| Region Code Options | Set Options | This function is used to set the region of the world that the radio is to be used in. |
| Seek/Scan Sensitivity Levels | Set Options | This function is used to adjust pass A and pass B stop levels. |
| VIN Relearn | - | This function is used to clear radio theft information and learn a new VIN. |