Installation Procedure
- Install the battery.
- Install the battery hold down retainers.
- Install the battery hold down retainer bolts.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
- Connect the battery vent tube to the battery.
- Install the positive battery cable from the battery.
- Tighten the positive battery cable nut (1).
Tighten: Tighten the nut to 15 N.m (11 lb ft).
- Close the positive battery cable cover (2).
- Install the spare tire.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
IMPORTANT:
Do not tip the battery more than 40 degrees during battery installation.
NOTE:
Refer to Fastener Notice
.