Power Steering Control Module Scan Tool Information (2.0L)
WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Calculated System Temperature | - | Varies | This displays °C (°F). This is the calculated system temperature. |
| Overload Protection Incidents | - | Varies | This displays a numeric value. |
| Steering Shaft Torque | - | Varies | This displays N-m. |
| Steering Wheel Position | - | Varies | This displays °. This is the current steering wheel position measured in degrees. |
| Vehicle Speed Status | - | Valid | The scan tool displays Valid or Invalid. This is the status of the vehicle speed. |
Power Steering Control Module Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Steering Pos./Torque Sensor Cal. | This output control is used to calibrate the steering position / torque sensor. |